NEWS

Environmental issues are becoming increasingly important and directly impact our daily lives. Hug Sticker are deeply concerned about and aware of the problem of global warming. That’s why we choose to use eco-friendly printing technologies, sustainable materials, and non-toxic inks.   Eco-Friendly Printing Technology What is HP Latex? HP Latex 800 and HP Latex 570: Printers that Reduce Toxic Emissions Non-Toxic Inks Energy-Efficient Cutting Machines     HP Latex is a printing technology developed by Hewlett-Packard (HP) that uses water-based inks as its primary component to create printed images. This technology is implemented in HP Latex printers, which are designed to support printing on a wide variety of materials such as vinyl, canvas, stickers, paper, and other specialty materials. The key features of HP Latex technology include its versatility for both indoor and outdoor use, the absence of harmful chemicals, and its eco-friendly nature.    HP Latex 800 and HP Latex 570 are industrial-grade printers that use HP's water-based Latex ink technology, designed to meet the demands of commercial printing and high-resolution printing. The HP Latex 800 has a special feature: the ability to print with white ink, enabling the creation of complex and highly detailed prints on a variety of materials such as vinyl, stickers, paper, and fabric. Eco-Friendly Features of the HP Latex 800 and 570: Non-Toxic Latex Inks: The inks used in both HP Latex printers are free from VOCs (Volatile Organic Compounds), have no strong odors, and are non-toxic, making them safe for users and minimizing air pollution. Zero Toxic Emissions: The printing process with HP Latex technology emits no harmful toxins, allowing safe use in controlled air environments or indoor settings. Environmental Certifications: HP Latex inks are internationally certified with standards like UL ECOLOGO® and GREENGUARD Gold, confirming that the products are safe and environmentally friendly. Energy-Efficient Printing Process: Both printers are designed to consume less energy compared to conventional printers, helping to reduce resource usage and environmental impact. Recyclable Printing Materials: They support printing on recyclable or reusable materials, promoting sustainable resource use and reducing waste generation. HP Latex Inks are water-based inks developed by HP for use in their HP Latex printers. These inks are known for their eco-friendly properties and safety in use, as they are free from harmful chemicals such as VOCs (Volatile Organic Compounds) that are often found in other types of inks. Eco-Friendly Features of HP Latex Inks: Free from Harmful Chemicals: HP Latex inks are certified to be free from harmful chemicals such as VOCs, which are commonly found in other types of inks. As a result, HP inks do not produce harmful fumes that could endanger the health of users and the environment. Strong Adhesion Without Toxic Substances: Despite being non-toxic, HP Latex inks maintain excellent adhesion to printing materials without the need for harmful chemicals. These inks are also highly durable for outdoor use, making them an ideal choice for printing stickers and commercial prints. International Safety Standards: HP Latex inks are certified by several international organizations, such as UL ECOLOGO® and GREENGUARD Gold, which confirm that these inks are safe for human health and the environment. Users can be confident in the safety of using HP Latex inks for various printing applications. Recyclable: In addition to being environmentally friendly during use, HP Latex inks are also easily recyclable. This is part of HP's commitment to reducing environmental impact and promoting sustainable resource use. Moreover, HP Latex inks can produce high-resolution prints with vibrant colors, making them popular for high-detail printing jobs, such as advertisements, stickers, and various graphic images. Graphtec FC9000-160 is a high-precision industrial-grade cutter designed for cutting stickers and various materials. Manufactured by Graphtec, a well-known name in the printing and material cutting industry, this model has a cutting width of 160 cm (63 inches) and is designed to handle a wide range of materials, including vinyl, canvas, film, and reflective materials. It is ideal for producing signage, vehicle stickers, and high-detail print jobs. Eco-Friendly Features of the Graphtec FC9000-160: Energy-Efficient Operation: The Graphtec FC9000-160 is designed to use less energy compared to previous models while maintaining excellent cutting performance. This energy efficiency helps reduce power consumption and minimizes environmental impact. Material Waste Reduction: With its precise cutting system, this cutter ensures accurate material cutting according to the desired dimensions, reducing material waste and minimizing production-related waste. Support for Eco-Friendly Materials: The Graphtec FC9000-160 is compatible with recyclable or environmentally friendly materials, contributing to sustainable production and reduced environmental impact. Durability and Longevity: Built with robust design and high-quality materials, this cutter has a long lifespan, reducing the need for frequent equipment replacements. This longevity helps decrease electronic waste and reduces the consumption of resources needed to produce new machines.    

View this post on Instagram A post shared by BMW Motorrad (@bmwmotorrad) Lamborghini Aventador S RoadsterThe artwork from the famous woman,Dr. Kanthicha Chimsiri (Yui) Dr. Yui stands out in both the beauty and motorsport industries. She was the winner of the Mrs. International 2016 pageant. In addition to her achievements in beauty, Dr. Yui is also a certified sport. Dr. Yui stands out in both the beauty and motorsport industries. She was the winner of the Mrs. International 2016 pageant. In addition to her achievements in beauty, The excitement of this project lies in showcasing the artwork of Dr. Kunticha Chimsiri by incorporating it onto the vehicle's body. The goal is to transform the artwork into a multidimensional visual experience from every angle, seamlessly flowing with the vehicle's contours, creating a captivating and luxurious appearance. At this stage, we will carefully pattern the vehicle to ensure that the seams of the artwork are as flawless as possible. BMW S1000RR LIMITED EDITIONRacing patterns inspired by the concept of Nicky Hayden's Arai helmet The design combines modern aesthetics with racing patterns inspired by the concept of Nicky Hayden's Arai helmet, along with a color scheme tailored to the customer's preferences. It's important to note that this bike is truly exceptional. Every custom part has been perfectly integrated, and the design adds a unique, limited-edition touch that sets this bike apart from any other. BMW S1000RR America Shark Concept Daytime, indoors, nighttime – three moods captured in a design that emphasizes aggression, sportiness, and vibrant colors at night. The shark pattern combined with the American flag, as requested by the customer, is perfectly blended with the unique style of HUGSTICKER CUSTOM. BMW S1000RR Inspired by the customer's tattoo The intricate patterns draw inspiration from the Maori tribe, intertwining with the striking image of an Apache woman tattooed on the owner's back. We want to incorporate the owner's tattoos into the design, using them to tell a story through the decals of motorbike, expressing the rider's unique style and personality. JETSKI SEADOO CONCEPTSOR JOR Number One X Hug Design Limited Edition: The Fierce Samurai We created a unique design that embodies the creativity of HUGSTICKER CUSTOM, blending our distinctive style with the client's vision. Samurai is a perfect blend of power and artistry. This unique design features the fierce imagery of a samurai, combining traditional Japanese aesthetics with modern flair. Every detail, from the bold colors to the intricate lines, tells a story of strength and honor, making this jet ski a true standout. Majin Buu BMW S1000RR Custom Designed This masterpiece blends the raw power of the BMW S1000RR with the mischievous and playful essence of Majin Buu from the Dragon Ball series. A full-body design enhances the bike's dimensions, making it appear larger. The patterns are crafted in Hug Sticker's signature style, emphasizing harmony with the bike itself. THE SECRET PROJECT 'CSM x HUG'LIMITED EDITION A collaboration between the global brand dealer, Chaisawat Motorbike, and HUG COMPANY brings to life the divine dragon, a celestial creature, now soaring and swimming across the designs of five motorcycle models. This creation symbolizes the arrival of 'fortune, power, and prosperity. Sai Bantheung X Hug Company COLLECTION 2024 CONCEPT CHICANO STYLE Design Concept: Chicano The concept centers around a child covered in tattoos, making the character be mature. This character serves as the storyteller for the intricate designs, with a distinctive feature being the child wearing a helmet. The lifestyle depicted is distinctly American, showcasing elements like boxers, sneakers, tattoos, and gold accessories. This design is the centerpiece and holds exclusive rights. We have used a special technique where the child character is rendered in reflective stickers, making them stand out at night. The surface combines matte metallic gray and black, enhanced with touches of gold chrome on various design elements, all finished with a layer of lacquer for added protection and shine.

Installing stickers to look neat and durable isn’t difficult if you have the right tools and follow the correct steps. Below is a guide to the necessary equipment and tips for installing stickers with professional quality: Essential Equipment for Sticker Installation Having the right equipment makes the sticker installation process easier and helps reduce the chances of issues like air bubbles or uneven application. 1. Clean Cloth and Cleaner: Use these to clean the surface where the sticker will be applied, removing dust, oil, and other debris before you start.   2. Painter’s Tape: Use this to position the sticker before the actual installation. This tape can be removed without damaging the surface. 3. Plastic Card or Squeegee: These are used to press down the sticker during installation, helping to remove air bubbles and ensuring a smooth adhesion to the surface. 4. Hair Dryer or Heat Gun: These tools help to soften the sticker, making it more flexible, especially when applying it on curved or complex surfaces. 5. Needle or Craft Knife: These are useful for popping small air bubbles that may form during installation. 6. Ruler or Measuring Tape: These are essential for ensuring the sticker is aligned and balanced before applying it. 7. Adhesive Remover or Glue Remover: Use these to clean off any adhesive residue left on the surface after removing a sticker. The process of installing stickers 1. Prepare the SurfacePreparing the surface before installing stickers is the most important step, as a clean and smooth surface ensures that the stickers adhere well and last long. Stickers from Hug Sticker Custom don’t require trimming or additional adjustments; simply clean the surface, and you’re ready to install them. 1.1) Clean the Surface: Use a clean cloth and a mild cleaner to wipe down the surface where the sticker will be applied, removing dust, oil, and other debris. After cleaning, ensure the surface is completely dry before starting the installation. 1.2) Check the Surface: Inspect the surface to ensure it is smooth. If there are any rough spots or cracks, they should be fixed before applying the sticker, as these can cause poor adhesion and air bubbles. 2. Choose the Position and Plan the InstallationBefore applying the sticker, take some time to plan and experiment with the placement. 2.1) Use Temporary Tape: Use low-tack tape (such as painter’s tape) to temporarily place the sticker in your desired position. Step back and view it from a distance to check if the placement looks good. 2.2) Measure and Adjust the Position: Use a ruler or measuring tape to ensure the sticker is level and balanced. If the placement is off, adjust it before starting the installation.   3. Apply the StickerOnce you’re satisfied with the position, it’s time to apply the sticker. This step requires careful attention to avoid bubbles and ensure smooth adhesion. 3.1) Start from One Side: Begin applying the sticker from one side, such as the top or bottom, and slowly peel off the backing paper as you press the sticker onto the surface. 3.2) Use a Plastic Card or Squeegee: Use a plastic card or squeegee to press down on the sticker as you apply it. This helps push out any air bubbles and ensures the sticker adheres smoothly to the surface. 3.3) Peel the Backing Paper: When peeling off the backing paper, do it slowly and carefully to ensure no part of the sticker lifts. If you encounter air bubbles, press them out with the plastic card.   4. Dealing with Air BubblesAir bubbles are a common issue when installing stickers, but they can be easily fixed with a few simple techniques. 4.1) Use a Needle or Craft Knife: For small air bubbles, you can use a needle or the tip of a craft knife to poke a tiny hole in the bubble, then use a plastic card to push the air out. 4.2) Smooth Out the Bubbles: Use a plastic card to smooth out the bubbles by pressing from the center of the bubble outward. If the bubble is large, it may take some time to carefully press out all the air. 5. AftercareAfter installing the sticker, proper care is important to ensure it lasts long and remains attractive. 5.1) Avoid Water for the First 24 Hours: After installation, avoid washing or exposing the sticker to water for the first 24 hours to allow the adhesive to fully bond with the surface. 5.2) Gentle Cleaning: When cleaning the sticker, use a soft cloth and plain water or a mild cleaner. Avoid using abrasive sponges or harsh chemicals. 5.3) Avoid Sunlight and Extreme Heat: Prolonged exposure to sunlight and extreme heat can cause the sticker to deteriorate faster. Try to avoid parking or placing items with stickers in direct sunlight for long periods. 6. Tips for Challenging SurfacesSometimes you may need to apply stickers to challenging surfaces, such as curved or uneven areas. Here are some tips for these situations: 6.1) Use Heat: If the surface is curved, such as the corner of a car, you can use a hair dryer or a heat gun to gently heat the sticker. This makes it more flexible and easier to conform to the curve. 6.2) Wet Application Method: For large or complex surfaces, you can use the wet application method. Spray a mixture of water and mild soap onto the surface and the back of the sticker before applying. This allows you to adjust the sticker’s position easily before the water evaporates and the adhesive bonds. 7. Correcting MistakesIf you notice a mistake after applying the sticker, such as incorrect placement or excessive air bubbles, don’t worry—you can fix it. 7.1) Peel Off and Reapply: If the sticker is in the wrong position or has major errors, you can carefully peel it off and reapply. If using the wet application method, spraying soapy water can help lift the sticker more easily. 7.2) Use Supplemental Stickers: If part of the sticker is torn or damaged, you can use a small supplemental sticker or adhesive patches to cover the damaged area. 8. Removing StickersIf you need to remove the sticker later, there are special techniques to avoid damaging the surface. 8.1) Use Heat: Apply heat using a hair dryer or heat gun to soften the adhesive, making it easier to peel off the sticker. 8.2) Use Adhesive Remover: You can use adhesive remover or glue remover to clean any leftover adhesive residue on the surface after peeling off the sticker. Sticker installation might seem complicated, but by following these tips and steps and using the right equipment, you can install stickers like a pro, ensuring they adhere smoothly and beautifully, lasting as long as possible

High-quality materials from trusted, leading brands that meet international standards: 3M Premium and HP Latex, ensuring the BEST sticker printing.       At Hug Sticker, we are committed to delivering the highest quality in every project. That's why we choose only the best materials and equipment. By utilizing 3M's premium stickers and HP's state-of-the-art printers, we ensure that every design not only looks stunning but also meets the highest industry standards. Whether you're looking for durability, vibrant colors, or precise detailing, our combination of 3M and HP technology guarantees exceptional results that stand the test of time Get to know 3M Premium and HP Latex Why 3M is the brand trustworthy? Why does Hug choose 3M stickers? Popular types of 3M stickers Why HP is the trusted brand in printing? Why does Hug choose HP Latex for sticker production? Why 3M is a trusted brand in quality products?3M has been a trusted brand in terms of product quality for many decades. There are several reasons why this brand is globally recognized:  Innovation: 3M is renowned for its research and development of new products that continuously meet the needs of consumers and various industries. 3M products cover a wide range of types, from tapes, adhesives, and industrial materials to consumer goods such as sandpaper and healthcare products.  High Quality: 3M prioritizes product quality. There is quality control at every stage of production to ensure that products on the market are of high quality and reliable.  Product Diversity: 3M produces a wide variety of products that meet the needs of consumers in various groups, making it easy for customers to find products that suit their needs.  Social Responsibility: 3M places importance on social responsibility and the environment. The company operates in a sustainable manner and considers the impact on the environment.  History: 3M has been established for a long time and has extensive experience and knowledge in the industry, making it a trusted and reliable brand.In conclusion: 3M's success stems from its focus on innovation, quality, product diversity, social responsibility, and a long history, making 3M a trusted and well-known brand worldwide. Why choose 3M stickers? Superior Quality: 3M stickers are made from high-quality materials, offering durability against various conditions, whether it's heat, cold, sunlight, or humidity. Variety: 3M provides a wide range of sticker options, including general-purpose stickers, reflective stickers, industrial stickers, and other specialized stickers. Strong Adhesion: The adhesive used in 3M stickers is strong, ensuring a secure and long-lasting bond that doesn’t easily peel off. Safety: Many 3M stickers are made from materials that are safe for the environment and users. Advanced Technology: 3M utilizes cutting-edge technology in sticker production, resulting in highly efficient products. Popular Types of 3M Stickers Reflective Stickers: Used to enhance safety in traffic, such as on cars, bicycles, or personal protective equipment. Waterproof Stickers: Ideal for areas exposed to water or moisture, such as in bathrooms or on boats. Industrial Stickers: Used for labeling, warning signs, or marking in industrial settings. Graphic Stickers: Used for decoration or creating artistic designs on various surfaces. HP, or Hewlett-Packard, has long been a trusted brand in the field of print quality, and this is due to several key factors: History and Reputation: Founded in 1939, HP has a long history of developing and manufacturing technology products, including printers. This history has built the brand’s reputation for reliability and quality. Innovation and Technology: HP has always been a leader in print innovation and technology. They continuously develop new technologies to improve printer performance, enhance print quality, and meet the diverse needs of users. Product Quality: HP products go through stringent manufacturing processes and quality control, ensuring that the products released to the market are of high quality, durable, and long-lasting. Product Variety: HP offers a wide range of printers, from home use models to large-scale business printers, meeting the needs of different consumer groups comprehensively. After-Sales Service: HP provides excellent after-sales service, with service centers and spare parts readily available. This ensures customers receive top-notch care after purchase. Sustainability: HP prioritizes sustainability in its operations, striving to reduce environmental impact. Many HP products are designed to be environmentally friendly. In summary, HP’s reputation as a trusted brand in print quality is built on its long history, continuous innovation, high product quality, wide product variety, excellent after-sales service, and commitment to sustainability. This makes HP a brand that consumers can rely on for high-quality products. Why Choose HP Latex for Sticker Printing? HP Latex is a highly popular printing technology in the sticker printing industry for several key reasons: Outstanding Print Quality: Latex ink offers unique properties that result in vibrant, sharp colors with high resolution. It is also resistant to sunlight and weather conditions, ensuring that printed stickers look beautiful and have a long lifespan. Versatility in Printing Materials: Latex technology can print on a wide variety of materials, including PVC stickers, clear stickers, and even fabric, making it adaptable to various application needs. Health and Environmental Safety: Latex ink contains no harmful volatile compounds and emits no unpleasant odors, making it safe for users and environmentally friendly. Fast Printing Speed: HP Latex printers are known for their high printing speed, allowing for the production of a large number of stickers in a short amount of time. Durability: Stickers printed with Latex ink are resistant to scratches, stains, and water, making them suitable for use in various environments. In summary, choosing HP Latex for sticker printing ensures that you receive high-quality, vibrant, durable, and eco-friendly stickers. Additionally, it helps reduce production costs and increases work efficiency.